DPI Anchor High Heat Spray Paint Heat Resistant

DPI Anchor High Heat Spray Paint Heat Resistant 

Anchor High Heat is an aerosol that works as a protective and decorative paint that is heat stable for temperatures up to 600°C. It is suitable for use on motorcycle exhausts, domestic stoves, furnace chimneys, industrial ovens. It can be used as a single coat, or two coats on bare ferrous metal surfaces.

• Anchor HI-TEMP spray.
• 600°C heat resistant.
• Suitable for exhaust motor.
• Used on motorcycle exhaust pipes and manifolds.
• High recommended for use on exhaust.
• Rust protection.
• Good adhesion.
• Petrol resistant.
• Crack resistant.

Benefits:

• Value of money.
• Easy to bring and use.
• Long-life performance.

Directions of use:

Surface Preparation: Remove grease, dirt, rust, moisture or loose paint from the surface to be sprayed.

Application:

1. Shake the can vigorously until the mixing ball moves freely for about 30 seconds.
2. Hold the can from a distance of 20cm.
3. Remove the plastic cap and point the nozzle towards the object to be sprayed.
4. Press gently with the index finger and spray the paint layer by layer.
5. Allow each layer to dry for 30 minutes.

-Storage:  Store in a dry and well-ventilated area and protect from the frost and strong sunlight.